5.Remove the rear grille by pulling out at bottom and dropping grille down.
6.Lift cabinet off unit base.
7.Brush coils clean, if necessary, with warm water and a mild detergent. Rinse and dry thoroughly. Be sure the power supply cord is disconnected from the electrical outlet.
NOTE: The compressor is sealed and needs no oiling. The fan motor is prelubricated and does not require further oiling under normal operating conditions. However, if the dehumidifier is operated under severe environmental conditions (dust, dirt, high temperatures) the fan motor should be oiled annually. Follow the instructions in Step 8.
8.Oil the fan motor through the tubes provided. An
Coils
9.Wash all plastic parts with a soft cloth, warm water and a mild detergent. Rinse and dry them with a soft cloth.
10.Replace cabinet and grille(s).
11.Reconnect dehumidifier to power supply.
12
