Whirlpool ADO25, AD050, AD040, AD030 Perating your dehumidifier, Control panel, Unit operation

perating your dehumidifier

Control panel

These units have a control panel containing two controls-the PAN FULL Light and the Humidistat.

PAN FULL Light-This light glows when the water pan is full and needs to be emptied.

Humidistat-This controls the amount of moisture in the room. When the humidity in the room rises above the setting, the unit automatically starts. When the humidity drops below the setting, the unit automati- cally stops. The unit will run constantly when the control is set to DRYEST.

Unit operation

1.Turn the Humidistat to OFF. Plug the power supply cord into an electrical outlet. Be sure to use the proper ground- ing method. (See page 6.)

2.Turn the Humidistat toward DRYEST for normal operation.

The Humidistat can be set anywhere between OFF and DRYEST. If you need more dehumidification, turn the Humidis- tat toward DRYEST. If you need less dehumidification, turn the Humidistat toward OFF.

3.Turn the Humidistat to OFF to stop the unit manually.

I PAN FULL HUMIDISTAT

0

OFF DRYEST

\

PAN FULL HUMIDISTAT

I0 OFF DRYEST

HUMIDISTAT