Whirlpool AD040, ADO25, AD050, AD030 Meeting electrical requirements, Recommended grounding method

4.The water pan must be properly positioned, on the hangers inside the cabinet, when dehumidifier is operating in order for the automatic shut-off to operate correctly.

5.Two rollers let you move the dehumidifier easily. Remove the water pan, tilt the unit forward and roll it to another position.

Meeting electrical requirements

OBSERVE ALL GOVERNING CODES AND ORDINANCES.

Electrical ground is required on this appliance.

A 115 volt, 60 Hz., AC only, 15 ampere fused electrical supply is recommended. (Time delay fuse or circuit breaker is recom- mended.) It is recommended that a separate circuit serving only this appliance be pro- vided. Do not use an extension cord.

DO NOT, UNDER ANY CIRCUMSTANCES,

REMOVE THE POWER SUPPLY CORD

GROUND PRONG.

Recommended grounding method

For your personal safety, this appliance must be grounded. This appliance has a power supply cord with a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating grounding type wall receptacle, grounded in accordance with the National Electrical Code (ANSVNFPA 70, latest edition) and all local codes and ordinances. If a mating wall receptacle is not available, it is the responsi- bility of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.

3-prong grounding type wall receptacle

Grounding prong

6