INSTRUCTIONS FOR OVEN USE
FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION
3 | 1 |
| |
6 | 2 |
| |
7 | 5 |
| |
| 12 |
| 4 |
| 8 |
11 | 5 |
10 |
|
| 9 |
1.Control panel
2.Upper heating element/grill
3.Cooling fan (not visible)
4.Dataplate (not to be removed)
5.Lamps
6.Circular heating element (not visible)
7.Fan
8.Turnspit (if present)
9.Lower heating element (not visible)
10.Door
11.Position of shelves (the number of shelves is indicated on the front of the oven)
12.Rear wall
N.B.:
-During cooking, the cooling fan may switch on at intervals in order to minimise energy consumption.
-At the end of cooking, after the oven has been switched off, the cooling fan may continue to run for a while.
-When the oven door is opened during cooking, the heating elements switch off.
ACCESSORIES SUPPLIED
Fig. A | Fig. B | Fig. C | Fig. D | Fig. E |
A.WIRE SHELF: the wire shelf can be used to grill food or as a support for pans, cake tins and other ovenproof cooking receptacles.
B.DRIP TRAY: the drip tray is designed to be positioned under the wire shelf in order to collect fat or as an oven tray for cooking meat, fish, vegetables, focaccia, etc.
C.BAKING TRAY: for cooking all bread and pastry products, but also roasts, fish en papillotte, etc.
D.CATALYTIC PANELS: for easier and more thorough cleaning of the oven walls.
E.SLIDING RUNNERS: to facilitate insertion and removal of accessories.
The number of accessories may vary according to which model is purchased.
ACCESSORIES NOT SUPPLIED
Other accessories can be purchased separately from the
EN7
