SETTING END OF COOKING TIME / DELAYED START

The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only be done once cooking time has been set. This setting is only possible when

pre-heating is not required for the selected function.

180°C

 

- 00:20

TEMPERATURE

 

HH:MM

No

Forced Air

19:20

 

PREHEAT

 

END TIME

 

 

 

180°C

 

- 00:20

TEMPERATURE

 

HH:MM

No

Forced Air

19:20

 

PREHEAT

 

END TIME

180°C

 

- 00:20

TEMPERATURE

 

HH:MM

No

Forced Air

20:10

 

PREHEAT

 

END TIME

After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end of cooking time, and thus also the cooking start time, proceed as follows:

1.Position the cursor next to the end of cooking time using buttons .

2.Press button to select the setting: the end of cooking time flashes.

3.To delay the end of cooking time, use buttons and to set the desired value.

4.Confirm the selected value by pressing button.

5.Press button . The display indicates which shelf food should be placed on.

6.Press button to activate the function. The oven will start cooking after a period of time calculated

so as to finish cooking at the set time (for example, in the case of a dish which requires a cooking time of 20 minutes, if the end of cooking time is set to 20:10, the oven will begin cooking at 19:50).

N.B.: during the interval before cooking starts, the oven can in any case be switched on by pressing button .

At any time during cooking, set values (temperature, grill setting, cooking time) can be changed

using buttons and button as described in previous paragraphs.

TIMER

00 : 00 : 00

 

 

01 : 10 : 00

01 : 09 : 00

(HH) (MM) (SS)

 

 

(HH) (MM) (SS)

 

Press to set Timer, to Start

 

 

Press to set Timer, to Start

Timer

 

 

 

 

 

This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. The maximum time which can be set is 1 hour 30 minutes.

1.With the oven switched off, press button : the display will show “00:00:00”.

2.Press buttons and to select the desired time.

3.Press button to start the countdown. When the set time has elapsed, the display will show “00:00:00” and an acoustic signal will sound. At this point the time can be prolonged, proceeding as

described above, or the timer can be deactivated by pressing button (the time of day will be shown on the display).

EN11

Page 14
Image 14
Whirlpool AKZM 663 manual Setting END of Cooking Time / Delayed Start, Timer