Using Your Oven
The electronic oven controls
There are three parts in the oven control section:
-The digital display.
-The command buttons.
-The Time/Temp Set Knob.
Instructions for each oven control are covered on the following pages. Read them carefully.
When you first plug in the oven, the display will flash the last time of day set. If, after you set the clock (see below) the display again flashes the last time of day set, your electricity was off for a while. Reset the clock.
Digital display/clock
When you are not using the oven, this is an accurate digital clock. When using the oven or Minute Timer, the display will show the time, temperature settings and what command buttons have been pressed.
When showing the time of day, the display will show the hour and minutes
When setting the Mmute Timer, the display will show minutes and seconds as follows :
. For settings from 0 minutes to 1 minute 55 seconds, the display will increase in 5second increments.
1 For settings from 2 minutes to 9 minutes 50 seconds, the display will increase in
1 For settings from
. For settings from 1 hour to 1 hour 55 minutes, the display will increase in
1 For settings from 2 hours to 9 hours
50 minutes, the display will increase in
When using Cook Time, the display shows hours and minutes.
Command buttons
The command buttons tell the oven what to do and in what order. A few examples:
-Clock tells the oven you are going to set the clock.
-Set/Cancel tells the oven to turn off.
Each command button (except Set/ Cancel) has its own indicator. The indicator comes on when you touch the command buttons.
Time/Temp Set Knob
Once you’ve pushed a command button to tell the oven what you want it to do, you’ll use the Time/Temp Set Knob to set a temperature or time. Turning the Time/Temp Set Knob clockwise increases the number on the display. Turning the Time/Temp Set Knob counterclockwise decreases the number on the display.
Setting the electronic clock
1.Push the Clock button. The TIME indicator will show in the display.
2.Turn the Time/Temp Set Knob until the correct time shows m the large display.
3.Push the Set/Cancel button to start clock operation.
Using the electronic Minute Timer
The Minute Timer does not start or stop the oven. It works like a kitchen timer. It can be set in minutes and seconds or hours and minutes up to 9 hours, 50 minutes. You will hear three beeps when the set time is up.
Push the Timer button. The TIMER indicator will come on and the large display will show “:00”.
Turn the Time/Temp Set Knob until the desired time shows in the large display. The Minute Timer will begin counting down 2 seconds after the time is set.
When time is up, you will hear three beeps and the time of day will show in the large display. After the first three beeps, you will hear one beep every 10 seconds until you push the Set/Cancel button.
To cancel the Minute Timer:
1 Push the Timer button and turn the Time/Temp Set Knob until ” :00” shows in the large display.
. Do not push the Set/Cancel button (see below) or it will cancel any bake or broil program that has been set.
Using the Set/Cancel button
The Set/Cancel button will cancel any command except for times set with the Timer button. When the Set/Cancel button is pushed, the large display will show the time of day or, if Minute Timer is also being used, the time remaining.
Page 4
