Whirlpool CEDC392PQ0 Dryer USE, Starting Your Dryer, Stopping and Restarting, To stop your dryer

Models: CEDC392PQ0

1 16
Download 16 pages 15.86 Kb
Page 10
Image 10

DRYER USE

Starting Your Dryer

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything flammable on it (even after washing).

Failure to follow these instructions can result in death, explosion, or fire.

Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping.

1.Clean the lint screen before or after each cycle. See “Cleaning the Lint Screen.”

2.Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space for clothes to tumble freely.

3.Turn the Cycle Control knob to the recommended cycle for the type of load being dried. Use the Energy Preferred

Automatic Setting (*) to dry most heavyweight and medium weight loads. See “Drying, Cycle, and Temperature Tips.”

WARNING

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

4.Press the PUSH TO START button.

Stopping and Restarting

You can stop your dryer any time during a cycle.

To stop your dryer

Open the dryer door or turn the Cycle Control knob to OFF.

NOTE: The Cycle Control knob should point to an Off area when the dryer is not in use.

To restart your dryer

1.Close the door.

2.Select a new cycle and temperature (if desired).

3.Press the PUSH TO START button.

10

Page 10
Image 10
Whirlpool CEDC392PQ0 Dryer USE, Starting Your Dryer, Stopping and Restarting, To stop your dryer, To restart your dryer