Whirlpool CGX315V, CGX310V, CLX31OV, CGX215V, CGX635V Using Your Cooktop, Using the surface, burners

Using Your Cooktop

Models	CGX655V (shown)	&		Using the surface	burners
CGX635V (chrome cooktop without griddle)				Your cooktop is equipped with either
Surface	burners	Griddle	Surface burner arates	standing pilots or electronic ignitors.
				Standing pilots must be lit initially with a
				match following the directions on page 4.
				The pilot light will remain lit when the
				burners are turned off. To turn a burner
				on again, just push in and turn the
				control knob to LITE and the burner will
				light. Electronic ignitors	automatically
				light the burners each time the control
				knob is turned to LITE.

Control knobs		/	Control panel	Model	and serial number plate
				(under	cooktop)
Models CGX315V (shown),
CGX310V	(standing	pilot ignition)	&
CLX31OV	(L.P. gas model)

Surface burners	Surface burner
\	I

I

Model and serial number plate (under cooktop)

Model CGX215V

Surface burner grates

Surface burners

Model and serial number plate (under cooktop)

grates	Control panel
	I

I \

Control knobs

Control panel

Control knobs

Control knobs must be pushed in, then turned to the LITE position. On electronic ignitor models, the clicking sound is the ignitor sparking.

After the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and low setting. Do not cook with the control in the LITE

position.

I Bum And Fire Hazard

. Burner flame should not extend beyond the edge of the cooking utensil. The flame can burn you and cause poor cooking results.

. Be sure all control knobs are turned to OFF and all power ON lights are off when you are not cooking. Someone could be burned or a fire could start if a burner is accidentally left on.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings, then turn the control knob down to continue cooking.

Continued on next page

Page 3