Whirlpool DISHWASHERS manual When cycle is finished, Electrical connection, Converting to built-in

When cycle is finished

1.Turn hot water off. (This can be done after the last rinse.)

2.Press the red button on the connector to release the water pressure.

3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector.

4.Empty any remaining water from the connector by turning the connector upside-down.

5.Unplug power supply cord and return to

storage compartment.	Hose connection
6. Return hoses to storage compartment.

Electrical connection

A power supply of 120 votts, 60Hz AC, 15 or 20 amps, is required. For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a

3-prong grounding plug. To minimize possible shock hazard it must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Do not, under any circumstances, remove the power supply cord ground prong.

3.prong grounding

Power supply

cordI 3.prong grounding type wall receptacle

Converting to built-in

Your Whirlpool Portable Dishwasher can be
converted to a built-in (undercounter) model by
using conversion kit No. 4317856. The kit is
available at your Whirlpool dealer or authorized
WhirlpoolSM service company. Instructions are	21
included with the kit.