Whirlpool DISHWASHERS manual Cycle selection chart

Cycle selection chart

Cycle

Pots & Pans

A double wash for maximum cleaning of cooked-on or

bakedon foods.

NOTE: The Cycle Control knob stops while the dishwasher heats water to 135°F (57°C) in both washes and the final rinse (marked+). See page 10.

Heavy Wash

A double wash for cleaning heavily soiled loads.

NOTE: The Cycle Control knob does not move while the dish- washer heats water to 135°F (57°C) in the final rinse (marked +). If the Hi-Temp Wash option is selected water will also be heated in the main wash (marked ++).See page 10.

Normal Wash

A single wash for normal, everyday soiled loads. (The

Energy Guide Label is based on this cycle.)

NOTE: The Cycle Control knob does not move while the dish- washer heats water to 135°F (57°C) in the final rinse (marked +). If the Hi-Temp Wash option is selected water will also be heated in the main wash (marked ++).See page 10.

	Iat stf	5 are	each	Cycle
				Time
Iins	Nash	Unse	Gnse	[Minutes)

rt . 90-l 20’

. . ml-t . l t 76'

. at+ . ml . 66*

‘Cycle time includes heated dry time. Cycle time may vary depending on the temperature of the water entering the dishwasher.

9