Before starting your dishwasher
1.Spin the Upper Spray Arm to make sure nothing will stop it from turning freely.
2.Close and latch the door.
3.Run hot water at sink nearest dishwasher until it is hot. Turn it off. (See page 14 for connecting instructions.)
c
CLEAN SELECTORBUTTONS
Starting your dishwasher
POTS 81PANS Cycle...
1.Make sure Cycle Control Knob points to dot marked POTS & PANS.
2.Push POTS & PANS Clean Selector Button.
3.Push button for option desired.
4.Without turning it, pull out the Cycle Control Knob to start the cycle.
HEAVY WASH Cycle...
1.Make sure Cycle Control Knob points to dot marked HEAVY WASH..
2.Push HEAVY WASH button.
3.Push button for option desired.
4.Without turning it, pull out the Cycle Control Knob to start the cycle.
NORMAL WASH Cycle...
1.Turn Cycle Control Knob clockwise until it stops at dot marked NORMAL WASH.
2.Push NORMAL WASHbutton.
3.Push button for option desired.
4.Without turning it, pull out the Cycle Con- troi Knob to start the cycle.
Changing a setting
You can change a setting anytime during any cycle.
1.Unlatch the door to stop the cycle, but don’t open it until the spray arms stop spinning.
To add a dish after starting
1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed NORMAL WASH.
2.Unlatch the doorto stop the cycle.
3.Open the door and add the dish.
RINSE & HOLD Cycle...
1.Push NORMAL WASHbutton.
2.Select AIR DRYOPTION only. Do not use
3.Turn Cycle Control Knob clockwise to dot marked RINSE& HOLD.
4.Close and latch the door to start the cycle.
2.With the Cycle Control Knob pulled out, turn clockwise to the cycle you want.
3.Be sure the detergent dispensers are filled properly for the new cycle.
4.Latch the door to start the cycle.
4.Close the door. Do not latch it. Wait 30 sec-
onds for air in the dishwasher to warm UD. This helps reduce the amount of moisture that can come from the vent when restart- ing the cycle.
5.Latch the door. The dishwasher will start from where it stopped.
HI-TEMP WASHING Option
When this option is selected, water for the main wash and the final rinse is heated [except in RINSE & HOLD) to 145’F
rinsing action in those parts of the cycle will be longer if the water is heated.
8