Whirlpool DP940PWS Dishwasher Loading, ConnectingtoWaterandElectrical Supply, UsingtheFaucet

Models: DP940PWS

1 44
Download 44 pages 27.64 Kb
Page 9
Image 9
ConnectingtoWaterandElectrical Supply

ConnectingtoWaterandElectrical Supply

1.Run water at the faucet until it is hot. Turn off the water.

2.Pull the hoses out of their storage compartment on the back of the dishwasher.

NOTE: Make sure the hoses are not kinked or twisted. Kinked hoses reduce washing performance.

3.Pull down on the locking collar while lifting the hose connector onto the faucet adapter.

AUsingtheFaucetDisconnectingtheDishwasher

BA

CDISHWASHER LOADINGLoadingSuggestionsManual backgroundManual background

A.Faucet adapter

B.Locking collar

C.Hose connector

4.When the connector snaps into place, release the locking collar.

5.Turn the hot water on slowly until it is all the way on.

6.Plug into a grounded 3 prong outlet.

UsingtheFaucet

You can draw water from the faucet while the dishwasher is connected.

NOTE: Do not draw water while the dishwasher is filling or while water is being pumped out. (This helps avoid a low fill when dishwasher is filling or mixing drain water with fresh water when dishwasher is draining.)

Press the red button on the hose connector to draw water from the faucet. (The faucet is set on hot. Adjust the faucet for the water temperature you want.)

NOTE: Turn the hot water back on after you draw water from the faucet. Turn off the cold water.

DisconnectingtheDishwasher

1.Turn off the hot water. (This can be done after the last rinse.)

2.Press the red button on the connector to release the water pressure.

A

B

C

D

A. Faucet adapter

B. Locking collar

C. Red button

D. Hose connector

3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector.

4.Empty any remaining water from the connector by turning the connector upside-down.

5.Unplug the power supply cord and return it to the storage compartment.

6.Return the hoses to the storage compartment.

DISHWASHER LOADING

LoadingSuggestions

Remove leftover food, bones, toothpicks and other hard items from the dishes. It is not necessary to rinse the dishes before putting them into the dishwasher. The wash module removes food particles from the water. The module contains a chopping device which will reduce the size of food items.

NOTE: If hard items such as fruit seeds, nuts, and eggshells enter the wash module, you might hear chopping, grinding, crunching, or buzzing sounds. These sounds are normal when hard items enter the module. To avoid damage to the dishwasher, do not let metallic items (such as pot handle screws) get into the wash module.

It is important for the water spray to reach all soiled surfaces.

Load dishes so they are not stacked or overlapping, if possible. For best drying, water must be able to drain from all surfaces.

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not interfere with the spray arm rotation.

Run a rinse cycle to keep dishes moist if you do not plan to wash them soon. Foods such as eggs, rice, pasta, spinach, and cooked cereals may be hard to remove if they are left to dry over a period of time.

9

Page 9
Image 9
Whirlpool DP940PWS Dishwasher Loading, ConnectingtoWaterandElectrical Supply, UsingtheFaucet, DisconnectingtheDishwasher