Whirlpool DU4003XL manual HEAT DRY or AIR DRY?, To add a dish after starting, POTS & PANS Cycle

Models: DU4003XL

1 16
Download 16 pages 17.88 Kb
Page 8
Image 8
Before starting your dishwasher

Before starting your dishwasher

1.Spin the Upper Spray Arm to make sure nothing will stop it from turning freely.

2.Close and latch the door.

3.Run hot water at sink nearest dish- washer until it is hot. Turn it off.

////

Clean Selector Buttons Option Selector Buttons

Starting your dishwasher

POTS & PANS Cycle. ..

1.Make sure Cycle Control Knob points to dot marked HEAVY WASH, POTS & PANS.

2.Push POTS & PANS Clean Selector Button.

3.Push button for option desired.

4.Without turning it, pull out the Cycle Control Knob to start the cycle.

NORMAL WASH Cycle...

1.Turn Cycle Control Knob clockwise until it stops at dot marked NORMAL WASH.

2.Push NORMAL WASH button.

3.Push button for option desired.

4.Without turning it, pull out the Cycle Control Knob to start the cycle.

RINSE 81 HOLD Cycle...

HEAVY WASH Cycle...

1.Make sure Cycle Control Knob points to dot marked HEAVY WASH.

2.Push HEAVY WASH button.

3.Push button for option desired.

4.Without turning It, pull out the Cycle Control Knob to start the cycle.

HEAT DRY or AIR DRY?

If the HEAT DRY Option is selected, air in the dishwasher is heated during the “dry” part of the cycle.

If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longerto dry (over-

1.Select AIR DRY Option only.

2.Push NORMAL WASH Button.

3.Unlatch door and open slightly.

4.Pull Cycle Control Knob out.

5.Turn Control Knob Clockwise to dot marked RINSE & HOLD.

6.Close and latch the door to start the cycle.

night) and some water spotting may result. Some items (such as plastics) may need towel drying.

To add a dish after starting

1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed NORMAL WASH.

2.Unlatch the doorto stop the cycle, but don’t open it until the spray arms stop spinning.

3.Open the door and add the dish.

4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restart- ing the cycle.

5.Latch the door. The dishwasher will start from where it stopped.

8

Page 8
Image 8
Whirlpool DU4003XL manual HEAT DRY or AIR DRY?, To add a dish after starting, POTS & PANS Cycle, NORMAL WASH Cycle