CYCLE SELECTORBUTiONS OPTION SELECTORBUllONS
Starting your dishwasher
1.Push a Cycle Selector Button for the desired cycle. (Use NORMAL WASH for the RINSE & HOLD Cycle.)
2.Push Option Selector Button fordesired option or options. (Use AIR DRY for RINSE & HOLD Cycle.)
3.Turn Cycle Control Knob clockwise to pointto a desired cycle.You will feel a definite stop at each cycle mark.
-POTS & PANS and NORMAL WASH Cycles share the same spot on the dial. The Cycle Selector Button determines which cycle operates.
The dishwasher will automatically start that cycle.
NOTE: Options may be changed or cancelled
by pushing the Option Selector Button(s) again.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for’cooked- or
the dishwasher automatically heats the water to 145 F (63 C) in both washes and the last rinse [marked ‘1. Cycle time will be about 1% to 2
hours, depending on time needed to heat water
HEAVY WASH Cycle
A double wash for heavily soiled loads. Cycle time is about 70 minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 55minutes.
LOW ENERGY WASH Cycle
For
RINSE & HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time IS about IO minutes.
Use AIR DRY only. Do not use
8