Whirlpool DU7600XS manual The AIR DRY Option, The CLEAN Signal Light, HI-TEMPWASHING Option

Models: DU7600XS

1 16
Download 16 pages 18.99 Kb
Page 9
Image 9
The AIR DRY Option

CLEAN SdNAL LIGHT

cwx CONTROL KNOB

The AIR DRY Option

Air in the dishwasher is automatically heated during the “dry” part of all cycles

If the AIR DRY Option is selected, air In the dishwasher is not heated Using this option helps save energy. but dishes take longerto dry (over- night] and some water spotting may result

Some items (such as plastics] may need towel drying.

For best results, use a liquid rinse aid such as Jet-Dry. R

HI-TEMP WASHING Option

When this option is selected, water for the main wash and the final rinse is heated to145 F (63 C). Washing and rinsing action in those

Using DELAY START

1.Push desired Cycle Selector Button.

2.Push desired Option Selector Buttons.

3.Turn Control Knob clockwlse to the number of hours (1or 2 hours] you want the dishwasher to delay before the selected cycle starts.

parts of the cycle will be longer if the water is heated. HI-TEMP washing is automatic in POTS & PANS.

4. Close and latch the door.

NOTES:

l You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

lRINSE & HOLD and LOW ENERGY WASH Cycles can’t be delayed.

To add a dish after starting

1.To be sure the added Item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH.

2.Unlatch the doorto stop the cycle.

3.Open the door and add the dish.

4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restat-t- ing the cycle.

5.Latch the door. The dishwasher will start from where it stopped.

Changing a setting

You can change a setting anytime during any cycle.

1.Press in the door latch to unlatch the door and stop the cycle.

2.Turn the Cycle Control Knob clockwise to the cycle you want.

3.Be sure the detergent dispensers are filled properly for the new cycle.

4.Close and latch the door, The dishwasher will

automatically start the new cycle.

The CLEAN Signal Light

The CLEAN

Signal Light will come on when a

To turn

it off. Turn the

Control Knob clockwise

washing cycle

IS complete

slightly

until the light

goes off.

Page 9
Image 9
Whirlpool DU7600XS manual The AIR DRY Option, The CLEAN Signal Light, HI-TEMPWASHING Option, Using DELAY START