DELAY WASH SIGNAL LIGHT
Selecting a cycle
POTS 8 PANS Cycle
Maximum cleaning for cooked- or
the dishwasher automatically heats the water to 145 F (63’C) in both washes and the last rinse (marked ‘1, Cycle time will be about 1% to 2
hours, depending on time needed to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled loads. Cycle time is about 75 minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads. [The Energy Guide Label data is based on this cycle.) Cycle time is about 65 minutes.
LOW ENERGY WASH Cycle
For
RINSE & HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time is about 15 minutes.
Use AIR DRY only. Do not use
Using DELAY START
I. Push desired Clean Selector Button.
2.Push desired Option Selector Buttons.
3.Turn Control Knob clockwise to the number of hours (from 1 to 6 hours] you want the dish- washer to delay before the selected cycle starts.
4.Close and latch the door. The DELAY WASH Signal Light will come on until the selected cycle starts.
NOTES:
l You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.
lRINSE & HOLD and LOW ENERGY WASH Cvcles can’t be delayed.
The RESET | OPTIONS | Button | |
If you | want to | change a selected | option, push the RESET OPTIONS Button. |
option, | if desired. |
| 9 |
