4. Run hot water at sink nearest dishwasher until | CYCLE SELECTOR BUllONS | OPTldil SELECTOR BUllONS |
it is hot. Turn it off. |
|
|
Starting your dishwasher
POTS & PANS Cycle...
1.Push POTS& PANSCycle Selector Button.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked POTS & PANS. The dish-
washer will automatically start that cycle.
NORMAL WASH Cycle...
1.Push NORMAL WASHCycle Selector But- ton. NORMAL WASH and LOW ENERGY WASHCycles share the same Cycle Se- lector Button. The Control Knob setting determines which cycle operates.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked NORMAL WASH. The dish-
washer will automatically start that cycle.
LOW ENERGY WASH Cycle...
1.Push LOW ENERGYWASHCycle Selector Button.
-LOWENERGYWASHand NORMAL WASH Cycles share the same Cycle Selector Button. The Control Knob setting deter- mines which cycle operates.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked LOWENERGYWASH.The dish-
washer will automatically start that cycle.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
the dishwasher automatically heats the water to 145’F (63%) in both washes and the last rinse(marked ‘1. Cycle time will be about 1% to 2
hours, depending on time needed to heat water.
NORMAL WASH Cycle
For normal, everyday soiled loads. [The Energy Guide Label data is based on this Cycle.] Cycle time is about 58 minutes.
RINSE & HOLD Cycle...
1.Push RINSE & HOLD Cycle Selector Button.
2.Select AIR DRYOption only.
3.Turn Cycle Control Knob clockwise to dot marked RINSE & HOLD. The dish-
washer will automatically start that cycle.
8
