Operating Instructions
Continued
Startingyourdishwasher
1. Push a Cycle Selector Button for the desired cycle. NORMAL WASH, LOW ENERGY WASH and RINSE & HOLD Cycles share the same button. The Cycle Control Knob determines which cycle operates.
2. Push an Option Selector Button for each desired option. (Use AIR DRY for RINSE 8 HOLD Cycle.)
3. Turn the Cycle Control Knob clockwise to point to a desired cycle. You will feel a definite stop at each cycle mark. The dishwasher will automati- cally start that cycle.
Toadda dishafterstarting
1. To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH.
2. Lift up on the door latch to unlatch door and stop the cycle. Don’t open the door until the spray arms stop spinning.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle.
5. Press door firmly to latch it. The dishwasher will automatically start where it stopped.
Changing cyclesetting
You can change a setting anytime during any cycle.
1. Lift up on the door latch to unlatch the door and stop the cycle. Don’t open the door until the spray arms stop spinning.
2. Turn the Cycle Control Knob clockwise to the cycle you want.
3. Be sure the detergent dispensers are filled properly for the new cycle.
4. Push door firmly to latch it. The dishwasher will automatically start the new cycle.
Changinganoption
If you want to change a selected option, push the RESET OPTIONS Button. Reselect an option, if desired.
4
