Whirlpool DU87OOXT manual Before starting you, Selecting a cycle, Cycle SELE&R Buttons

Before starting you- - -_-_ -_-__-

1.Read “Important Safety Instructions” on page 2 before starting your dishwasher.

2.Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely.

3.Push doorfirmly when closing and itwill auto- matically latch.

4.Run hot water at sink nearest dishwasher until it is hot. Turn it off.

St&ing your dishwasher

1.Push a Cycle Selector Button for the desired cycle. (Use NORMAL WASH for RINSE & HOLD Cycle.]

2.Push Option Selector Button for desired option or options. (Use AIR DRY for RINSE & HOLD Cycle.)

3.Turn Cycle Control Knob clockwiseto pointto a desired cycle. You will feel a definite stop at each cycle mark.

CYCLE SELE&R BUTTONS

-POTS & PANS and HEAVY WASH Cycles share the same spot on the dial. The Cycle Selector Button determines which cycle operates.

The dishwasher will automatically start the selected cycle.

Selecting a cycle

POTS & PANS Cycle

Maximum cleaning for cooked- or baked-on foods. Timer delays while

the dishwasher automatically heats the water to 145’F (63°C) in both washes and the last rinse (marked l ). Cycle time will be about 1% to 2

hours, depending on time needed to heat water.

HEAVY WASH Cycle

A double wash for heavily soiled loads. Cycle time is about 76 minutes.

NORMAL WASH Cycle

For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 68 minutes.

LOW ENERGY WASH Cycle

For pre-rinsed or lightly soiled loads. Cycle time is about 60 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 14 minutes.

Use AIR DRY only. Do not use HI-TEMP WASH Option.