Whirlpool DU87OOXT HI-TEMP Wash Option, AIR DRY Option, Using Delay Start, Changing a setting

CLEAN CYCiE LIGHT CYCLE CONiROL KNOB

HI-TEMP WASH Option

When this option is selected, water for the main wash and the final rinse is heated to145” F (63” C]. Washing and rinsing action in those

parts of the cycle will be longer if the water is heated. HI-TEMP washing is automatic in POTS & PANS.

The AIR DRY Option

Air in the dishwasher is automatically heated during the “dry” part of all cycles.

If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry [over-

night] and some water spotting may result. Some items (such as plastics) may need towel drying.

For best results, use a liquid rinse aid such as Jet-Dry:”

The RESET OPTIONS Button

If you want to change a selected option, push the RESET OPTIONS Button. Reselect an option, if desired.

Using DELAY START

1.Push desired Cycle Selector Button.

2.Push desired Option Selector Button(s).

3.Turn Control Knob clockwise to the number of hours (from 1 to 4 hours) you want the dish- washer to delay before the selected cycle starts.

Changing a setting

You can change a setting anytime during any cycle.

1.Lift up on the door latch to stop the cycle. Don’t open the door until the spray arms stop spinning.

The CLEAN Signal Light

The CLEAN Signal Light will come on when a washing cycle is complete.

4. Close and latch the door.

NOTES:

l You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

lRINSE & HOLD and LOW ENERGY WASH Cycles cannot be delayed.

2.Turn the Cycle Control Knob clockwise to the cycle you want.

3.Be sure the detergent dispensers are filled properly for the new cycle.

4.Press door firmly to latch it. The dishwasher

will automatically start the new cycle.

To turn liaht off. turn the Control Knob clock- wise slight6 until the light goes off.

To add a dish after starting

1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH.

2.Liff up on the door latch to stop the cycle. Don’t open the door until the spray arms stop spinning.

3.Open the door and add the dish.

4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasherto warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle.

5.Press door firmly to latch it. The dishwasher

will start from where it stopped. 9