![Using CANCEL DRAIN](/images/new-backgrounds/75357/7535719x1.webp)
Using CANCEL DRAIN
CANCEL |
| Push | the | CANCEL | ||
DRAIN | DRAIN |
| Button to | stop | ||
| any cycle at any time | |||||
| for any | reason. |
| |||
| l | All | dishwasher | ac- | ||
|
| tion |
| will | stop | and |
|
| water | will | drain | from | |
F |
| the | dishwasher. |
| ||
l The draining | will take | about | 2 minutes. | The |
RINSE/DRY Signal Light will be on during this time.
l When the dishwasher is drained, all signal lights will go off.
l Select a new cycle, if desired.
NOTE: When CANCEL DRAIN is pushed, the timer
automatically moves to a drain position. You may hear the timer ticking or clicking as it advances. This is a normal sound.
If CANCEL DRAIN is pushed near the end of a cycle, the CLEAN Signal Light may come on. To turn it off. Push CANCEL DRAIN again.
The signal lights
WATER
HEATINGRINSE/
DELAY HOLD WASH DRY CLEAN
m m m m m
Signal lights go on and off during a cycle to let you know what your dishwasher is doing.
DELAY
WATER HEATING HOLD Light - Comes on when the dishwasher is heating water (to 145”F/63”C) during the wash or rinse portion of the cycle.
WASH
RINSE/DRY
CLEAN Light - Comes on when a cycle is over. It will siay on until CANCEL DRAtN Button is pushed.
To add a dish after starting
1.To be sure the added item is washed, make sure the WASH Signal Light is still on and that the covered section of the detergent dispenser has not opened.
2.Unlatch the door to stop the cycle, but don’t open it until the spray arms stop spinning.
3. Open the door and add the dish
4.Close the door. Do not latch It. Wait 30 seconds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle.
5.Latch the door. The dishwasher will restart and continue the cycle.