Whirlpool DU935QWD warranty Using the rinse agent dispenser, To check dispenser, To fill dispenser

Using the rinse agent dispenser

Keep the rinse agent dispenser filled with a liquid rinse agent. A rinse agent greatly improves dish drying by helping water flow off them during the last rinse. A rinse agent also keeps water from forming drop- lets and drying as spots or streaks.

A small amount of rinse agent automati- cally releases into the rinse water during the final rinse of each cycle. For best drying results, check dispenser periodically to see if it needs filling.

To check dispenser:

l Check center of Fill Indicator Cap. Clear means it needs filling.

OR

l Remove Fill Indicator Cap. An “E”is visible when dispenser is empty.

To fill dispenser:

The rinse agent dispenser holds 6 ounces (175 mL). Under normal conditions, this lasts about 3 months.

1.Open dishwasher door completely.

2.Remove Fill Indicator Cap.

3.Add rinse agent. Fill to smallest opening in lower par-l of dispenser only. Overfilling may cause rinse agent to leak out. This will not harm the dishwasher, but could cause oversudsing.

4.Clean up any spilled rinse agent with a damp cloth.

5.Replace Fill Indicator Cap. Keep it closed tightly.

NOTE: You do not have to wait until the dispenser is empty before refilling, but do not overfill it. Your dishwasher is designed to use a liquid rinse agent. You do not need to use a solid or bar-type rinse agent.

	OR
Cap center clear	“E” visible
when empty	when empty

Keep dispenser filled for best drying results

11