Whirlpool DU930QWD, DU935QWD warranty Setting the Controls, Selecting a wash cycle

Setting the Controls

Operating your dishwasher’s controls properly helps you obtain the best possible washing results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a cycle pad unless you select the delay wash cycle. You may press Option pads as the machine is filling.

			T	ihow: iv vhat	each cycle	includes		T CYCLE
CYCLE				WAIN		FINAL		TIME
				3INSE VA!3	3INSE	3INSE		Minutes,
RINSE/WASH	LATER
						.		12
during Rinsemash		Later.
l Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for			prerinsed
or	lightly	soiled	loads.
l Select High Temp Wash				.+		.++	.	60’
to heat water in the main

wash (marked +).

l The water heats to 140°F (60%) in the final rinse (marked++).

NORMAL

. .+ . .++ .

to heat water in the main wash (marked+).

l The water heats to 140°F (60%) in the final rinse (marked ++).

POTS-N-PANS

. l + . .++ .

(marked +j. ’

lThe water heats to 140°F (60°C) in the final rinse (marked++).

66.

76’

12

Lycle rlme lncluaes ary rime ana may be longer cfependmg on the temperature of water enter the dlshwasher. the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown

The cooler