If YOUneed service or assistance, we suggest yob follow these four steps:
1.Before calling for assistance...
Performance problems often result from little things you can find and fix yourself without tools of any kind.
If your dlshwasher will not run, or stops during program:
l Is the door tightly closed and securely latched?
l Has the program been correctly set (and the START pad pressed)?
l Is the water turned on?
l Have you checked your home’s main fuses or circuit breaker box?
l Is the dishwasher wired into a live circuit with the proper voltage (undercounter models)?
l If the motor has stopped because of an over-
load, it will automatically reset itself within a few minutes. If motor does not start, call for service.
If water remains in the dishwasher: l Has the door been left ajar?
l Has the program completed?
l Touch CANCEL. The dishwasher will automati- cally go into a 2 minute drain period.
If detergent remains in the covered detergent cup:
l | Is the | bottom | rack in backwards? | (The rack | |
| bumpers should be at the front.) |
| |||
l | Is the | dishwasher | detergent | fresh? |
|
l Has the program completed? |
|
|
If you hear grinding, grating, crunching, buzzing sounds:
l A hard object has probably entered the POWER CLEAN Module. The sound should stop when the object is ground up.
If “1” appears in the display or Pads won’t program:
l The hidden
If the programming tone does not beep, or is only heard when CANCEL pad is touched:
l The programming tone has been turned off with the hidden
programming tone back on. (See page12.)
2. If you need assistance*...
Call Whirlpool
Continental U.S. . . . . . . . . . . (800)
and talk with one of our trained Consultants. The Consultant can instruct you in how to obtain sat-
isfactory operation from your appliance or, if
service is necessary, recommend a qualified service company in your area.