Starting your dishwasher
Six program pads, a hidden
When first installed, “PF”will show on the display. Press CANCEL pad twice to clear the display. To startthe dishwasher, press the PROGRAM pad. The
dishwasher is
To select a different program and/or option, just touch the PROGRAM and/or OPTION pad until the program and/or option you desire appears in the display. Each touch of the pad advances the dis- play to the next program or option. After each use, the dishwasher remembers the program and op- tions used. Ex: The next time the display is lit up
for programming, it will show the last cycle that was run.
When dishes are loaded and ready to be
washed...
1.Spin the Upper Spray Arm to make sure nothing will stop it from turning.
2.Close and latch the door.
3.Run hot water at the sink nearest the dishwasher until it is hot.
4.Select a desired program by touching the PROGRAM pad.
5.Select an Option by touching the OPTIONS pad.
6.Touch START pad.
Selecting a program
POTS & PANS
Maximum cleaning for
or
automatically heats the water to 145°F (63°C) in both washes and the last rinse (marked l ). Program time’* is 77 minutes plus the time needed to ’ heat the water.
WASHING AND | RINSING AND | DRYING CLEAN |
HEAT WATER | HEAT WATER |
HEAVY
A double wash for heavily soiled loads. Program time** is 73 minutes.
NORMAL
For normal, evervdav soiled loads. (The Energy Guide Label data is based on this program.) Program time** is 72 minutes.
WASHING | RINSING | DRYING | CLEAN |
WASHING | RINSING | DRYING | CLEAN |
|
| ||
’ |
|
|
|
**Program time includes heated dry times. 30 minutes less time is required with AIR DRY selected.
8
