Selecting an option
m
Options can be selected by touching the SELECT OPTION pad. Each touch of the pad advances the display to the next option. There are
three options | available: | AIR DRY,HEAT DRY and | HI TEMPAII optionscan | |||
be changed | any | time | the display | is on, including | during a program. | |
When the RINSE program | is selected, options | are not available. When | ||||
POTS & PANS or | CHINA | program | is selected, | only | HEAT DRY and AIR | |
DRY options | are | available. |
|
|
| |
AIR DRY
The AIR DRY option helps save energy, but the dishes take longer to dry (overnight). Some water spotting may result. Some items (such as plastics) may need towel drying. For best results, use a liq- uid rinse aid such as
HEAT DRY
When HEAT DRY is selected, the air in the dish- washer is heated during the “dry” portion of any program - except RINSE.
HI TEMP
When HI TEMP is selected, the water for the main wash and final rinse is heated to 145 F (63 C). POTS & PANS has the HI TEMP option
A Dry Option will show in the display with HI TEMP Be sure to select the desired Dry Option (HEAT DRY or AIR DRY) in combination with HI TEMP
lTouch SELECTOPTION pad until HI TEMP indicators are shown in the display.
l Option indicators will show in the display if they cannot be selected with a program; RINSE, POTS & PANS or CHINA.
l You can change an option while the program IS running by touching the SELECTOPTION pad.
Using PROGRAM MEMORY
The use of PROGRAM MEMORY lets you store the complete dishwashing program that you most fre- quently use.
To set PROGRAM MEMORY for the first time:
1.Touch PROGRAM MEMORY pad once. The PRO- GRAM Indicator will show on the display.
2.Select the dishwashing Program, Options and Delay Hours. This is done by touching the SELECT PROGRAM, SELECT OPTION and DELAY pads.
3.Touch PROGRAM MEMORY pad a second time. This enters the selected Program, Options and Delay Hours into the dishwasher’s memory.
NOTE: Each step must be completed within
15 seconds. If not completed in 15 seconds, the display will go blank.
To start the dishwasher using PROGRAM MEMORY:
l Touch START. The dishwasher will immediately start If Delay Hours are in the Program Memory, the dishwasher will start the delay count down.
To change the dishwashing program in PRO-
GRAM MEMORY:
1.Touch PROGRAM MEMORY pad once. The dis- play will show the set Program, Options and Delay Hours (if selected).
2.Touch in the new Program, Options and/or De- lay Hours you want. NOTE: If you want to cancel
Delay Hours, the hours must be advanced to the blank that comes after the 9.
3.Touch PROGRAM MEMORY pad a second time. This enters the selected Program, Options and Delay Hours into the dishwasher’s memory,
NOTE: Each step must be completed within IS
seconds. If not completed in 15 seconds, the old Program, Options and Delay Hours will re- main as they were.
In case of a power interruption or failure:
The PROGRAM MEMORY will be erased. Reset the ‘ROGRAM MEMORY for the Program, Option and Ielay Hours you want.
10
