Whirlpool DU9700XT manual To add a dish after starting

HEAT WATER and water temp erature are dis- played when:

9 Water is being heated for both washes and the final rinse portions of the POTS & PANS program.

l Water is being heated forthe main wash and the

A hrdden LOCK-OUT pad is located in the center of the Control Pads This pad lets you turn off the pro- grammrng tone or lock-out the function of the Con- trot Pads (except CANCEL)

When the LOCK-OUT pad is pressed and held for

3 or more seconds, the programming tone will turn off The tone will not sound when the pads are touched or when the door IS opened. To turn the

programming tone back on, press and hold the LOCK-OUT pad for 3 or more seconds

final rinse portions of other programs when the HI TEMP option has been selected.

l Temperatures are 55°F or higher, The display will show the actual temperature.

l Temperatures increase to 145°F. Readings up to 144°F will be displayed. When 145-F is reached, the temperature is not shown; instead the display changes to the remaining program time. NOTE: The program time remains the same while the water is being heated.

When the LOCK-OUT pad is touched twice within

2 seconds,“L” will show in the digital display [for 2 seconds) and all control pad operations [except

CANCEL) and the programming tone will be locked out. If a control pad is touched while in LOCK-OUT, the display will show an “L”for 2 sec- onds. This shows you that LOCK-OUT IS being used

To return the control pads and programming tone to full operation, touch the LOCK-OUT pad twice in 2 seconds The pads will work agaln

To add a dish after starting

1.To be sure the added item IS washed, make sure the WASHING indicator is still

2.To stop the dishwasher, unlatch the door by pushing In the latch handle under the control panel Do not open the door until the spray arms stop spinning. The DOOR OPEN indicator will flash and a tone will beep

4.Close the door. Do not latch it. Wait 30 seconds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the program.

5.Push in on the door until it latches The dish-

washer will restart and continue the program.