Starting your dishwasher
SIX program pads, a hidden
When first Installed, “PF”will show on the display. Press CANCEL pad twice to clear the display. To start the dishwasher, press the SELECT PROGRAM
pad The dishwasher is
To select a different program and/or option, just touch the SELECTPROGRAM and/or SELECTOPTION pad until the program and/or option you desire appears In the display Each touch of the pad ad- vances the display to the next program or option.
After each use, the dishwasher remembers the program and options used. Ex: The next time the
d/splay IS lit up for programming, it will show the last cycle that was run
When dishes are loaded and ready to be
washed...
1.Read “Important Safety Instructions” on page 2 before starting your dishwasher.
2.Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely.
3.Push door firmly when closing and it will auto- matically latch.
4.Run hot water at sink nearest dishwasher until it is hot. Turn it off.
5.Select a desired program by touching the SELECT PROGRAM pad.
6.Select an option by touching the SELECTOPTION pad.
7.Touch START pad.
Selecting a program
POTS & PANS
Maximum | clecnrng | for |
| ||
:jr | fr,ods | The | program | ||
‘:me delays while the dishwasher | |||||
| |||||
automatically | heats | the | water | to | |
345 F (03 C) in coth washes and the | |||||
ast rinse (markcAd ‘1 Program time” |
| ||||
‘s 77 minutes | plLs the | time | needed | to |
“eat the water
WASHING | AND | RINSING | AND |
|
HEATING | WATER | HEATING | WATER | DRYING CLEAN |
HEAVY |
|
|
|
| WASHING | RINSING | DRYING | CLEAN |
was’: | for | heavily | soiled |
|
|
| ||
|
|
|
| |||||
.oads Prograrr | :/me” | IS 73 | minutes. |
|
|
|
|
NORMAL
WASHING | RINSING | DRYiNG | CLEAN |
For normal. evcrryday sorled loads irhe Energy G!lrde Label data IS snsed on this program ] Program ‘!me’ * 1s72 mirl Jtes
“;‘r~~grarn:!me ncludes heated dry times. 30 minutes less time is required with AIR DRY selected.
9