Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items,
To remove glass shelves:
1.Ilt up at front.
2.Lift up at back.
3.Pull shelf straight out.
. Glass shelves are heavy: Be careful.
To replace:
A. Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
Removing the freezer shelf. .. ,,
1. Lift front slightly. | rllll | I |
2.Lift back off supports.
3.Replace in reverse order,
Lltt the Front 4
Then the Back
Removing the freezer basket.. .
For proper air movement, keep the freezer basket in place when the refrigerator is operating,
To remove the basket:
l
l
l
Slide out to the stop.
Lift the front to clear the stop. Slide out the rest of the way.
To replace the basket:
l
l
l
Place basket on the slides. Make sure the wire stops clear the front of theslides. Slide basket in.
Removing the crispers and crisper covers...
Removing crispers:
1.Slide crispers straight out to stop
2.Lift the front.
3.Slide the rest of the way out.
4.Replace in reverse order
Push the Tab to Clear
the Cover.
Removing covers:
Covers are held in by two pegs at the back and t notched tabs in front.
1.Press front out of way.
2.Lift cover front.
3.Lift back out of pegs.
4.Replace in reverse order
If necessary, the center leg can be made shorter or longer to help level the crisper covers. Turn the leg clockwise to make it longer.Turn the leg counterclock- wise to shorten it.
6
