B.INSTALLING WATER VALVE ON WER BACKOF CABlNET LEG
Bl. Temporarily remove screws from right end of lower back cover,lf present.
82. Insert water valve into receptacle terminals completely so terminals are not exposed.
83. Fasten valve to right rear leg of the refrigerator with two screws (#488649).
CmINSTALLING WATER LINE BETWEEN INLET TUBE (bp) AND WATER VALVE (battom)
488645
‘EPCl
0 841707
836240
b
Cl. Remove plug from factory installed inlet tube on back. Place one clamp (#488878) over the spout. Put tube insert (#841707) in one end of tubing that has been soaking in hot water. Put end of tubing into spout. Tighten clamp with screw
(#488645).
C2. Place 2 clamps (#488366) over tubing. Remove two upper sealing screws in back of cabinet and throw away. Anchor clamps to cabinet with screws (#488645). (If lower back cover is not present or on bottom freezer refrigerator, use 1 clamp and 1 screw.)
STEP C2 | C3. Be sure that tube is clear of fan. Cut off extra |
| tubing. |
