I | I I’ |
Using your refrigerator
FREEZER CbNTROL | REFRlGERATOh CONTROL | POWiR SAVING CONTROL | LIGHT SWITCH |
Setting the controls...
Controls forthe refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...
1.Set the REFRIG CONTROL to 3
2.Set the FREEZE CONTROL to B.
Changing the control settings...
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
Give the refrigerator time to cool down com- pletely before adding food. (This may take sev-
eral hours.)
These settings should be about right for nor- mal household refrigemtor usage.
The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDITION:
| If Refrigerator | ||
| Section | is | |
| TOO WARM | ||
| If Freezer | ||
| Section | is | |
| TOO WARM | ||
QUEsTIONS? |
|
| |
...call your | If Refrigerator | ||
service | TOO COLD | ||
assistance | If ICE isn’t | ||
telephone | |||
MADE | FAST ENOUGH | ||
number | |||
|
| ||
(page 151.
|
|
|
|
|
|
| RECOMMENDED |
REASON: |
|
|
|
| CONTROL SETTINGS: | ||
Door | opened | often |
| Refrigerator | |||
Large | amount | of food | added | Freezer | |||
Room | temperature | too | warm |
| |||
Door | opened | often |
| Refrigerator | |||
Large | amount | of food | added | Freezer | |||
Very | cold | room | temperature |
| |||
(can’t | cycle |
| often enough] |
| |||
Controls | not | set | correctly | Refrigerator | |||
for your | conditions |
| Freezer | ||||
Heavy |
| ice | usage |
|
| Refrigerator | |
Very | cold | room | temperature | Freezer | |||
(can’t | cycle |
| often enough] |
| |||
If BOTH SECTIONS are TOO WARM
Door opened often
Large amount of food added Very warm or very cold room temperatures
Refrigerator Freezer
Power Saver Control...
The Power Saver Control on the Control Console operates electric heaters around the door open- ings. These heaters help keep moisture from form- ing on the outside of the refrigerator.
1.Use the “CONSUMES LESSENERGY” setting when humidity is low.
2.Use the “REDUCESEXTERIOR MOISTURE” setting if moisture forms on the outside of the refrigerator. The indicator light will glow when the switch is in the “REDUCESEXTERIOR MOISTURE” position.
