Whirlpool ED25SMIII Removing the crispeq meat pan and covers, Changing the light bulbs, page9

Removing the crispeq meat pan and covers...

To remove the crisper and meat pan:

1.Slide crisper and meat pan straight out to

2.Lift the front.

3.Slide the rest of the way out.

4.Replace in reverse order

To remove the covers:

l Covers are held in place by two pegs at the back and two notched tabs in front.

1.Press front tabs out of the way.

2.Lift cover front.

3. Lift back off the pegs.	Snap Back Into Place.
4. Replace in reverse order

Changing the light bulbs.. .

WARNING: Before removing a light shield for cleaning or for replaclng the bulb, either unplug refrigerator or dlscon- nect electrlclty leadlng to refrig- erator at the main power supply. Shock and InJury can occur If elec- trlclty remains connected.

I	Pull	Off the Dial;
	Pull Out at the Bottom
Removing the base grille...
1. Open the doors.	-I	II

light bulbs behind refrigerator and freezer con- trol consoles:

1.Pull control knob straight off.

2.Pull bottom of control panel straight out.

3.Lift top of panel off supports.

4.Replace with a 40-watt appliance bulb.

5.Replace panel in reverse order.

light bulb behind ice maker:

1. Remove the ice bin [see ice maker instructions

page9 1,

2.Replace with a 40-watt appliance bulb.

3.Replace ice bin.

Dispenser light:

1.Reach the bulb through the dispenser area

2.Replace with a heavy-duty IO-watt bulb.

r Metal Clips

1. Line up grille support tabs with metal clips

2. Pull grille outwards as shown.2. Push firmly to snap into place. 3. Do not removeTech sheet faste sned behind @le. 3. Close the doors.