Whirlpool EDl9VK Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

Temperature Control

\

Air Control

---I

Air Outlet

I

Power Saving Control

Setting the controls.. .

The Temperature Control is in the refrigerator and the Air Control is in the freezer section. When the refrigerator is plugged in for the first time,,

54@2’	$q5
3	2. Set the AIR CON-
I. Set the TEMPERA-
TURE CONTROL to 3.	TROL to 3.

Give the refrigerator time to cool down com- pletely before addlng tood. (This may take sev- eral hours,]

These settings should be about right tor normal household retrlgerator usage.

The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.

Do not block the air outlet on the control panel. Blocking it can slow the air movement needed to keep temperatures at the level you set.

Changing the control settings.. .

If you need to adjust temperatures In the’refriger- ator or freezer, use the settings listed in the chart below.

l

l

l

Adjust the Temperature Control first.

Wait at least 24 hours between adjustments. Then adjust the Air Control, if needed.

CONDITION:

If Refrigerator

Section is

TOO WARM

If Freezer

Section is

TOO WARM

QUESTIONS?

...call your If Refrigerator COOL-LINE” Section is

service TOO COLD

assistance If ICE isn’t

telephone MADE FAST ENOUGH number

(page 15). If BOTH SECTIONS are TOO WARM

REASONS:									RECOMMENDED SETTINGS:
Door		opened				often			Temperature	Control	4
Large		amount				of food		added	Air Control		3
Room		temperature					too	warm
Door		opened				often			Temperature	Control	3
Large		amount				of food		added	Air Control		4
Very	cold			room temperature
(can’t		cycle			often		enough]
Controls			not		set correctly				Temperature	Control	2
for your			conditions						Air Control		3
Heavy		ice		usage					Temperature	Control	3
Very	cold			room temperature					Air Control		4
(can’t		cycle			often		enough)
Door		opened				often			Temperature	Control	3
Large		amount				of food		added	Air Control		2
Very warm or very cold
rcom		temperatures

Power Saving Control.. .

The Power Savlng Control on the Control Con-

OFF

.-.

ON

sole operates ele&c heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the “OFF” set- ting when humidity is low.

2.Use the “0N”setting if moisture forms

on the outside of the refrigerator.