CHANGING THE BIN DOOR PANEL
You can easily change the color of the front panel on the storage bin door. Four colors are available; Blark, Almond, Harvest Gold and White.
To change the panel : _~
1.Ooen the bin door. Remove the two screws on top cjf the door, which hold the handle.
2.Remove the handle
3; C~reiully slide the panels out. You will find two pane Is with four colors.
4.Choose the color you want to show and carefully slide the panels back into the door, being careful not to scratch the panel as it’s inserted.
5.Replace the handle and screws.
Note: A brushed chrome door panel is available that you can order from your dealer as part No. 755340.
You can also have a decorative wood front to match existing cabinets. The panel should be l/4”
(6 mm) thick and 17” x
the ribs on the door insulation to allow for wood thickness.
FILTERING AND TREATING WATER
In n‘ost areas it will be beneficial to filter or treat th; \tvater being supplied to the ice machine. It can
Improve the reliability of the machine, reduce
vvatrr system maintenance and produce the best quaicti/ of ice.
The installation of a polyphosphate feeder will generally reduce scale
Municipal water systems are generally treated with chlorine to maintain a safe potable water supply.
Activated carbon filters will sufficiently remove
the residual chlorine from the water to reduce surface staining of stainless steel materials in the ice machine.
For information on filtering and treating the water, see the dealer from whom you purchased your ice
maker or your WHIRLPOOL Franchised TECH- CARE@ service company.
TO SHUT DOWN THE ICE MAKER
1.imi;rn ice maker to “OFF.”
2.Remove all ice frorr storage bin.
3.Shut off the water supply.
4.Remove front grille (Figure 2).
5.[),sconnect the inlet and outlet lines to water vain. Allow these lines to drain and then recon- nect to the valve,
6.Replace front grille .jnd screws.
7.Remove water from drain lines and drain water pan if the unit will be subjected to freezing tem- peratures during shut down.
8.Before using again, clean and sanitize the ice maker and storage bin.
Oiling:
All components of the ice maker are permanently
lubricated at the factory. They should not require
any additional oiling throughout the normal life of the machine.
