■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements” in either the Installation Instructions or the Use & Care Guide.

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

WATER FILTER CERTIFICATIONS

11

Page 10 Page 12
Page 11
Image 11
Whirlpool ES2FHAXSA00 warranty New installation? Flush and fill the water system, Dispenser water is not cool enough
Page 10 Page 12

ES2FHAXSA00 specifications

The Whirlpool ES2FHAXSA00 is a sleek and efficient side-by-side refrigerator that caters to the demands of modern households. With a total capacity of 25 cu. ft., this appliance provides ample storage space, making it a perfect fit for families of various sizes. Its thoughtful design combines innovation and functionality, bringing a high level of convenience to daily food storage.

One of the standout features of the Whirlpool ES2FHAXSA00 is its Accu-Chill Temperature Management System. This advanced technology ensures that the temperature within the refrigerator is consistently maintained. The system utilizes innovative sensors to monitor and adapt the cooling temperature, ensuring that your food stays fresher for longer periods. This feature is especially beneficial for those who wish to minimize food waste.

In terms of design, this model sports a smooth, stainless steel finish that adds a touch of elegance to any kitchen. The exterior is not only visually appealing but also easy to clean, making maintenance a breeze. The side-by-side configuration allows for easy access to both the refrigerator and freezer compartments. With adjustable shelves, door bins, and a slide-out shelving system, users can customize the storage according to their needs.

Another impressive feature is the In-Door-Ice System. This ice-making technology maximizes interior space by storing ice in the door, thereby allowing for more usable shelf space within the freezer. This design helps you enjoy ice on demand without sacrificing valuable room for frozen foods.

Moreover, the Whirlpool ES2FHAXSA00 also comes equipped with LED lighting that brightens every corner of the unit. The energy-efficient LED bulbs last longer than traditional bulbs, while providing enhanced visibility to help you find items quickly.

In terms of energy efficiency, this refrigerator meets ENERGY STAR guidelines, ensuring that it not only performs well but also consumes less electricity. This not only contributes to environmental sustainability but also helps lower utility bills, making it a practical investment for budget-conscious consumers.

Overall, the Whirlpool ES2FHAXSA00 combines contemporary aesthetics with cutting-edge technology, making it an excellent choice for anyone looking to enhance their kitchen with a reliable and stylish refrigerator. With features that promote efficient storage, energy savings, and user-friendly design, this model stands out as a top contender in the crowded appliance market.
Top Page Image Contents