INSTALLATION INSTRUCTIONS

UnpacktheRefrigerator

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

■If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.”

■Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

3

Page 2 Page 4
Page 3
Image 3
Whirlpool ES2FHAXSA00 Installation Instructions, UnpacktheRefrigerator, LocationRequirements, Electrical Requirements
Page 2 Page 4

ES2FHAXSA00 specifications

The Whirlpool ES2FHAXSA00 is a sleek and efficient side-by-side refrigerator that caters to the demands of modern households. With a total capacity of 25 cu. ft., this appliance provides ample storage space, making it a perfect fit for families of various sizes. Its thoughtful design combines innovation and functionality, bringing a high level of convenience to daily food storage.

One of the standout features of the Whirlpool ES2FHAXSA00 is its Accu-Chill Temperature Management System. This advanced technology ensures that the temperature within the refrigerator is consistently maintained. The system utilizes innovative sensors to monitor and adapt the cooling temperature, ensuring that your food stays fresher for longer periods. This feature is especially beneficial for those who wish to minimize food waste.

In terms of design, this model sports a smooth, stainless steel finish that adds a touch of elegance to any kitchen. The exterior is not only visually appealing but also easy to clean, making maintenance a breeze. The side-by-side configuration allows for easy access to both the refrigerator and freezer compartments. With adjustable shelves, door bins, and a slide-out shelving system, users can customize the storage according to their needs.

Another impressive feature is the In-Door-Ice System. This ice-making technology maximizes interior space by storing ice in the door, thereby allowing for more usable shelf space within the freezer. This design helps you enjoy ice on demand without sacrificing valuable room for frozen foods.

Moreover, the Whirlpool ES2FHAXSA00 also comes equipped with LED lighting that brightens every corner of the unit. The energy-efficient LED bulbs last longer than traditional bulbs, while providing enhanced visibility to help you find items quickly.

In terms of energy efficiency, this refrigerator meets ENERGY STAR guidelines, ensuring that it not only performs well but also consumes less electricity. This not only contributes to environmental sustainability but also helps lower utility bills, making it a practical investment for budget-conscious consumers.

Overall, the Whirlpool ES2FHAXSA00 combines contemporary aesthetics with cutting-edge technology, making it an excellent choice for anyone looking to enhance their kitchen with a reliable and stylish refrigerator. With features that promote efficient storage, energy savings, and user-friendly design, this model stands out as a top contender in the crowded appliance market.
Top Page Image Contents