Whirlpool ET16AK manual Remove Sales Labels, Clean It, Plug It In, Installa/onCon/nued

Installa/on(Con/nued...)

Explosion hazard. Ignion of rubbing

alcohol or inflammable or toxic solvents can cause serious injury or death. Do not use gasoline, carbon tetrachloride, etc. to clean this product.

3. REMOVE SALES LABELS...

Remove the Consumer Buy Guid label, tape, and any inside labels before use.

NOTE: Do not remove any permanent instrucon labels inside your refrigerator. Do not remove the.Tech Sheet fastened under the refrigerator at the front

To remove any remaining glue, do the following:

1. Rub briskly with thumb to make a ball and remove.

OR

2. Soak area with dishwashing detergent solution (1teaspoon detergent in 1 quart warm water) before removing glue as described in step 1.

4. CLEAN IT..

Prior to first use, and after removing all the packaging and sales labels, clean your refrigerator. Refer to “Cleaning Your Refrigerator”

(Pages 14 and 15).

5. PLUG IT IN...

Plug It In (Figure 5)

Electrical Shock Hazard. Electricity can cause death or serious injury. Always make sure wall receptacle and plug are grounded before plugging in refrigerator.

RECOMMEND ED GROUNDING MET HOD

(See Figure 5)

A 115 Volt, 60 Hz.,AC only 15 or 20 ampere fused and properly grounded electrical supply is required. Plug into a grounded three-prong outlet. Do not remove ground prong, do not use an adapter, and do not use an extension cord. It is recommended that a separate circuit serving only this appliance be provided.

See individual electrical requirements and grounding instruction sheet in your literature package.

4 Whirlpool Use and Care Guide–No-Frost Refrigerator-Freezer–Model ET16AK