Whirlpool ET1NK Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

Freezer Control

Power Saving Control

Setting the controls.. .

Controls	for the	refrigerator and	freezer are	i? the	Give	the refrigerator
refrigerator	When	the refrigerator	IS plugged	In for	pletely	before	adding
the first time					era1 hours )

time to cool down com- food. (This may take sev~

il Set the REFRIGERA- - TOR CONTROL to 3

2 Set the F-REEZER CONTROL to 6

These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk or juice IS as cold as you IIke and when ice cream IS firm

Changing the control settings.. .

If you need to adjust temperatures In refrigerator or freezer, use the settings listed in the chart below

l

l

l

Adjust the Refrigerator Control first

Walt at least 24 hours between adjustments Then adjust the Freezer Control, If needed

CONDITION:

If Refrigerator

Section IS

TOO WARM

If Freezer

Section IS

TOO WARM

QUESTIONS?

call your If Refrigerator COOL-LlNEo Section ,s

service TOO COLD assistance

telephone If ICE lsn 1

						RECOMMENDED	CONTROL
REASONS:						SETTINGS:
Door	opened		often			Refrigerator	4
Large	amount		of food		added	Freezer	C
Room	temperature			too warm
Door	opened		often			Refrigerator	3
Large	amount		of fo&		added	Freezer	A
Very cold rcxxm temperature
[can’t	cycle often			enough]
Controls		not set correctly				Refrigerator	2
for your		conditions				Freezer	B
He?,	q ice usage					Refrigerator	3
							A

number

MADE FAST ENOUGH

cold room temperature	Freezer
[cant cycle often enough)

(page 11)

I’ BOTH SECTIONS are TOO WARM

Door	opened	often	Refrigerator	4
Large	amount	of food added	Freezer	B
Very warm or very cold
room	temperatures

Power Saving Control.. .

The Power Saving Control on the Contro! COON sole operates electric nesters around the door openings These heaters help keeD moisture from faming on the outslde of the refrigerator

4m

1Use the ‘CONSUMES LESS ENERGY setting when humldiry IS low

2Use tie ‘REDUCES EXTERIOR MOISTURE setting only If moisture forms on the outslde of the retrlgerator