Adjusting the refrigerator shelves...
I, Ftrst, remove food from shelf
2Slide shelf strarght out to stop
3Lift front
4.Slrde the rest of the way out
Replacing Shelf:
1 Frt back of shelf on top of gurdes wrth wire stops on the bottom of gurdes.
2 Lrft front, slide shelf In until rt clears g&e stops
Moving the meat pan and cover...
The meat pan and cover can be removed for cleanrng and moved to another shelf, If desred Remove the meat pan first
Removing:
I Slide the pan out to stop.
2.Lift the front of meat pan.
3.Slide pan the rest of the way out
4.Tilt cover up at front.
5.Pull forward and out
Replacing:
1 Fit notches underneath cover over rear and center cross bars on shelf
2.Lower cover In place.
3.Replace meat pan rn reverse order
Removing crispers and crisper cover.. .
Removing the Crispers:
1 Slide crrsper strargnf out to stop, lift front, then side the rest of the way out
2 Replace rn the reverse order
Removing Cover:
1 Loftfront and remove the cover support
2 Loftout cover by pullrng up and out
Replacing Cover:
1 Fit bock of cover Into notch supports on walk of refrrgerator, then lower front Into place
2 Replace cover support with the long tab towards the front Note: If support needs adjustment. turn base right to lower, or left to rorse
Lift the Front, Then the Back.
Pull out to stop. e Front and Pull Again.
Changing the light bulb...
WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect
the electricity leading to the re- frigerator at the main power supply. Shock and injury can occur if elec- tricity remains connected.
1 Reach behInd control console to find bcllb
2 Remove bulb
3 Replace with a 0watt opp:jance bcllb
Removing and adjusting the freezer shelf...
To remove shelf:
1 Lift front slrghtly
2. Loftback off supports
3 Replace In reverse order
70 adjust shelf:
1 Remove sheif
2 Remove supports by sltdrng upwards
3 Replace supports on desired level
4 Replace shelf b