Whirlpool ET20AK Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

REFRIGERATOR FREEZER CONTROL

Setting the controls...

Controls forthe refriger refrigerator. tihen the ref the first time..

1.Set the REFRIGERA-

TOR CONTROL TO 4

2.Set the FREEZER

Give the refrigerator time to cool down com-

mal household refrigerator usage.

Refrigerator Control adjustments range from 1to

8. Freezer Control adjustments range from A to D.

Changing the control settings...

If you need to adjusttemperatures in refrigerator or freezer, use the settings listed in the chart below.

l

l

l

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments. Then adjust the Freezer Control if needed.

											RECOMMENDED
		CONDITION:		REASON:							CONTROL SETTINGS:
		If Refrigerator		Door	opened			often			Refrigerator
		Section	is	Large	amount			of	food	added	Freezer
		TOO WARM		Room	temperature				too	warm
		If Freezer		Door	opened			often			Refrigerator
		Section	is	Large	amount			of	food	added	Freezer
		TOO WARM		Very	cold		room temperature
				(can’t	cycle			often	enough)
QUESTIONS?		If Refrigerator		Controls		not		set correctly			Refrigerator
call	your	Section	is	for your		conditions					Freezer
COOL-LINE’		TOO COLD
set-vice		If ICE isn’t		Heavy		ice	usage				Refrigerator
assistance
		MADE	FAST ENOUGH	Very	cold		room temperature				Freezer
telephone
				(can’t	cycle			often	enough]
number
		If BOTH SECTIONS		Door	opened			often			Refrigerator
(page	15).
		are TOO WARM		Large	amount			of food		added	Freezer
				Very warm or very cold
				room	temperatures

Power Saving Control...

The Power Saving Control on the Control Con-

Sole Operdes electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the “CONSUMES LESS ENERGY” setting when humidity is low.

2.use the “REDUCESEXTERIOR MOISTURE” setting if moisture forms on the outside of the refrigerator.

5