Adjusting the lateral-adjust shelf
To slide shelf
1.Lii slightly on shelf front.
2.Slide to desired location.
3.Lower shelf front to level position.
NOTE: You do not have to remove small items from the shelf before moving it
Lii front slightly.
Then rlide to new location.
To remove the shelf:
1.Remove all items from the shelf.
2.Hold hack of shelf with one hand.
3.Lii front of shelf to 45” angle.
4.Lower shelf slightly to release shelf from upper channel of track. Then pull sheff straight out.
NOTE: Shelf is heavy. Make sure you use both hands when removing shelf.
To remove shelf track:
1.Lii both sides of track slightly.
2.Pull track straight out.
To replace shelf track:
1.Guide track hooks into the shelf support slots on the hack wall of the cabinet.
NOTE: Make sure all three track hooks are in slots and that the slots are parallel to each other.
2.Push track backward and down.
3.Check that track is completely seated in the shelf supports.
Hold with both hands and lift front to 45” angle.
Hold both sides and lift up and out.
Shelf
Make-support sure all
3 sets of hooks ars in support slots.
10
