Moving the meat pan and cover... To remove the meat pan and cover:
The meat pan and cover can be removed for
cleaning and moved to another shelf, if desired.
Remove the meat pan first.
GLASS IS FRAGILE.
BE CAREFUL.
GLASS INSERT
COVER FRAME
1.
Slide meat pan out to the stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. To remove the cover, push up glass insert from
bottom, then lift out with both hands.
5. Lift cover frame straight up and out.
To
replace the meat pan and cover:
1.
Fit notches of cover frame sides over center shelf
support.
2. Lower cover frame into place.
3. Lower glass insert into cover frame.
4. Fit edges of pan into supports on cover.
5. Slide meat pan into place.
Changing the light bulbs... 1.
Reach behind the control console to find bulb
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
Removing crispers and crisper cover... To remove the crispers:
PULL OUT TO THE STOP. LlFl
THE FRONT AND PULL AGAIN.
THEN THE BACK.
GLASS IS HEAVY.
BE CAREFUL.
Adjusting the refrigerator shelves... GUIDE STOP
SHELF STOP
6
1.
Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace in reverse order.
To remove the cover:
1.
Push up glass insert from bottom,$en slide out
with both hands.
2. Lift front of cover frame and remove cover
support.
3. Lift out cover frame by pulling up and out.
To replace the cover:
1.
Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab toward
the front.
NOTE: If the support needs adjust-
ment, turn base right to raise, or left to lower.
3. Slide back of glass insert into place, then lower
front.
To remove the shelves:
1.
first, remove food from shelf.
2. Slide shelf straight out to the stop.
3. Lift front, slide shelf the rest of the way out.
To replace the shelves:
1.
Fit back of shelf on top of guides with wire stops
on the bottom of guides.
2. Lift front, slide shelf in until it clears guide stops.