Whirlpool ET18RK, ETl8DK manual UsingYourRefrigerator

UsingYourRefrigerator

Setting the controls

CONDITION:

If Refrigeralor

Section is

TOO WARM

If Freezer

Section is

TOO WARM

If Refrigerator

Section is

TOO COLD

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS are TOO WARM

Controls for the refrigerator and freezer are in the refrigerator. To adjust a control, reach under the console and turn the knob. When the refrrgerator is plugged in for the first time.

1. Set the Refrigerator Control to 4.

2. Se1 the Freezer Control to C.

							Give the refngerator time to cool down completely
							before adding food. (This may take several hours.)
							These settings should be about right for normal
							household	refrigerator	usage.
							The controls will be set about right when mrlk
							or juice is as cold as you like and when ice cream
							is firm.
							Refngerator Control adjustments range from
							1 to 8. Freezer Control adjustments range from
							A to D.
							Changing	the control	settings
							If you need to adjust temperatures in the refrigera-
							tor or freezer, use the settings listed In the chart
							below as a guide.
							l Adjust the Refrigerator Control first.
							. Wait at least 24 hours between adjustments.
							l Then adjust the Freezer Control if needed.
								RECOMMENDED
REASON:								CONTROL		SETTINGS:
Door		opened				often		Refrigerator		6
Large		amount				of food added		Freezer		D
Room		temperature					too warm
Door		opened				often		Refngerator		4
Large		amount				of food added		Freezer		A
Very	cold			room temperature
(can’t		cycle			often		enough)
Controls			not		set correctly			Refrigerator		2
for your			conditions					Freezer		A
Heavy		ice		usage				Refrigerator		4
Very	cold			room temperature				Freezer		A
(can’t		cvcle			often		enough)
Door		opened				oHen		Refngerator		6
Large		amount				of food added		Freezer		C

Very warm or very cold room temoeratures

5