Using Your Refrigerator
Continued
Metal, clips
defrost pan
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main power
supply. Failure to do so could result in
electrical shock or personal injury.
To change refrigerator light:
1. Disconnect refrigerator from power supply
2. Reach behind the Conlrol Console to find bulbs.
3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
Removing the base grille
To remove the grille:
1. Open the door.
2. Pull grille out as shown.
3. Do not remove Tech Sheet fastened
behind grille.
To replace the grille:
1. Line up grille support tabs with metal clips
2. Push firmly to snap into place.
3. Close the door.
See cleaning instructions for defrost pan and
condenser coils on page 11.
Reversing the door swing
You can change the hinges on your refrigerator so
the doors open the other way. Refer to the Instruc-
tlon sheet included with your refrigerator,
a