Whirlpool ET18RK, ETl8DK manual II111

Remove the glass insert,

litt the frame fro then the back.

II111

Pull out to the stoo.

and pull again.

Removing the crispers and crisper cover

TO remove the crispers:

1.Slide crisper strarght out to the stop, kft front, then slide the rest of the way out.

2.Replace in reverse order.

To remove the cover:

1.Push up glass insert from bottom, then slide oul wtth both hands.

2.Lift front of cover frame.

3.Lift out cover frame by pulling up and out.

4.Remove metal cover support.

To replace the cover:

1.Replace metal cover support on wall supports in front section of cabinet.

2.Fit back of corner into notch supports on walls of refrigerator, then lower into place.

3.Slide back of glass insert into place, then lower front.

Adjusting the crisper humidity control

You can control the amount of humidity in the moisture-sealed crisper,

1.The control can be adjusted to any setting between LOW and HIGH.

2.LOW (open) lets moist air out of crisper for best storage of fruits and vegetables with skins.

3.HIGH (closed) keeps moist air In the crisper for best storage of fresh leafy vegetables.

PuII out to the stop, lift the

front and pull again. kl

Moving the meat drawer and cover

To remove the meat drawer:

1.Slide the meat drawer out to the stop.

2.Lift the front.

3.Slide the drawer the rest of the way out.

4.Replace in reverse order.

To remove the cover:

1.Tilt front of cover up, lift at back, and pull straight out.

2.Replace in reverse order.

7