Cleaning your freezer
This freezer should be cleaned when frost has built up to about V4inch (6 mm) thickness Complete defrosting and cleaning should be done at least once a year
In high humidity areas, a freezer may need more frequent defrosting.
To defrost and clean:
1.Turn Temperature Control to OFF.
2.Unplug power cord.
3.Place a shallow pan on floor under drain hole in bottom of freezer.
4.Take out all food and removable parts.
Note: Wrap frozen foods and packages in several layers of newspaper and cover with blanket. Food will stay frozen for several hours.
5.Place pan of hot water inside freezer to speed melting of frost. Keep door open. Ice can be re- moved in large pieces as it melts Direct air from electric fan into freezer to speed defrosting.
6.Clean freezer according to the following directions.
After defrosting:
I. Remove shallow pan from underneath freezer 2. Plug in power cord.
3 See directions for “Setting the Temperature Con- trol:’ page 5.
Cleaning chart...
Oufslde | Sponge, cloth or paper | ||
| towel; | mild | detergent; |
| appliance | wax [or good | |
| auto | paste | wax). |
l
l
l
Wash with warm water and a mild detergent. Do not use abrasive or harsh cleansers.
Rinse and dry.
Wax painted metal surfaces at least twice a year with appliance wax or a good auto paste wax. Apply wax with a clean, soft cloth.
| Do not use wax on plastic parts. |
Waxing palnfed metal surfaces provldes rust protection. | |
I&,7,.%/, .A!& _. | |
Inside walls | Plastic | scraper, pans of | ||
| hot water, | electric | fan, | |
| sponge | or towel, | baking | |
| soda and | warm | water | |
l l
l
l
Use plastic scraper to remove frost.
Place pans of hot water in freezer with door open to speed melting. Directing air from an electric fan into freezer will also help.
Wash with solution of 2 tablespoons (26 g) baking soda to 1 quart (.95 L) warm water
Rinse and dry.
>sT
Door liner and gasket
DO NOT USEan Ice pick, knife of other
.,
Sponge. soft cloth or l Wash with mild detergent and warm water
paper towel; mild deter- * Rinse and dry gent and warm water.
| DO NOT USEcleaning waxes, | concentrated | defergenfs, bleaches | ||||||
| or cleansers confalnlng petroleum on plasflc parts. | ||||||||
| |||||||||
Condenser tolls | Use vacuum | cleaner |
| l | Slide | freezer | out away | from the wall. | |
| with brush | attachment. | l | Clean | dust | and | lint from condenser coils behind | ||
| WARNING: Watch | out |
| the freezer, | every | 2 or 3 months. | |||
| for sharp wire ends at |
|
|
|
|
|
| ||
| fop of condenser |
|
|
|
|
|
|
| |
| coils. They can cause |
|
|
|
|
|
| ||
| injury or damage | brush. |
|
|
|
|
| ||
6
