Whirlpool FGP300BL0 manual If range does not operate, For cleaning and maintenance

Models: FGP300BL0

1 7
Download 7 pages 11.95 Kb
Page 7
Image 7
If range does not

If range does not

operate...

l Check that the circuit breaker is not tripped or the house fuse blown.

l Check that power supply cord is plugged into wall receptacle.

l Check that the gas supply isturned on.

NOTE:

Refer to Use and Care Guide for operaltng instructions and cleaning instructions.

Personal Injury/

Product Damage Hazard

~Do Not step, lean or sit on the range drawer or door.

Failure to follow these instructions could result in personal injury and/or product damage.

Part No. 07716400/4363355 0 1994

For cleaning and

maintenance...

If removing the range is necessary for cleaning and maintenance, shut off gas supply to the range. Disconnect the gas and electrical supply.

If the gas or electrical supply is inaccessible, lift the range slightly at the front and pull the range away from the wall. Pull the range out only as far as necessary to disconnect the gas and electric supply lines.

Remove the range to complete cleaning or maintenance.

Move range back into operating position. Level the range. Connect the gas line to the range and check for leaks. Plug electric power supply cord into outlet.

Make sure the anti-tip bracket overlaps range base.

Benton Harbor, Michigan 49022

If you need

as&stance...

Check your Use and Care Guide for toll- free number to call, or call the dealer from whom you purchased this appliance. The dealer is listed in the Yellow Pages of your phone directory under “Appliances - Major.”

When you call you will need the range model and serial number. Both numbers can be found on the serial/rating plate located under the maintop.

Printed on recycled paper. 10% post consumer waste/ 50% recovered materials.

Printed in U.S.A.

Page 7
Image 7
Whirlpool FGP300BL0 manual If range does not operate, For cleaning and maintenance, If you need as&stance