Whirlpool FGP357Y Your, Range, Using the surface burners, This, Section, Burner heat settings

Using					Your	Range
In	This			Section		Pa*					Page
Uslng		the	surface		burners	7	Adjusting		the	oven temperature control	....... .12
Positioning				racks	and pans	9	Broiling				13
For	best		air circulation			10	Energy saving			tips	14
getting		the		clock	...............................................	11	The	oven	vent	...................................................	14
Using		the		Minute	Timer	11	The	anti-tip	bracket		14
Bakinglroaeting					................................................	12

To obtain the best cooking results possible, you must operate your range properly. This section gives you important information for eflicient and safe use of your range.

Using the surface burners

Your range is equipped with electric ignitors. -.

Electric ignitors automatically light the burnersPush in and turn each time they are used.

Push in control knobs and turn them to the LITE position. The clicking sound is the ignitor sparking. Visually check that burner has lit.

To stop the clicking sound after the burner lights, turn the control knob to the desired setting. The control knob has stops for HI, MED and LOW. However, you can set the control knob anywhere between HI and OFF.

Surface burner markers

The solid dot in the surface burner marker shows which surface burner is turned on by that knob.

Burner heat settings

Use correct burner heat settings (see next page).

If the heat setting is too high, it can:

lChar bacon and cause curling.

lMake eggs tough and crisp at the edges. l Toughen liver, fish and seafood.

. Scorch delicate sauces and custards. l Cause a boilover.