![](/images/new-backgrounds/1135120/13512021x1.webp)
9. Adjust settings (if desired)
The display will show the default settings for the selected cycle. If desired, press the button beneath each setting to adjust the Temperature, Soil Level, and Spin Speed, and to add options such as an additional Rinse. Use the t and u arrow keys to page to additional options. For more information on a cycle, press MORE INFO.
NOTE: Not all settings are available on all cycles. See “Cycle Guide” for available settings.
10. Select any additional options
(options vary by model)
Press the FanFresh®, Smart Grid, or EcoBoost™ button to add these options to the selected cycle.
If the FanFresh® option is selected, the washer will automatically activate the vent fan and tumble the load periodically for up to 16 hours. This is useful if you are unable to remove a load immediately after the cycle has finished.
The EcoBoost™ option provides additional energy savings through reduced hot water usage and maintains cleaning performance by lengthening the wash time on some cycles.
NOTE:
nNot all options and settings are available with all cycles, and not all features and cycles are available on all models.
nOn model WFL98 only, see the “Smart Feature Sheet”
for information about setting up Smart functionality, turning it on and off, receiving important notifications, and taking advantage of available features.
11. Setting a delayed start
EstimatedEstimated | min | min |
Cycle Time Time | ||
Cycle5959 |
| |
Normal/Casual |
|
|
Delay Start: 6 hours |
|
|
O | 20 hours | |
Use the arrows to increase or decrease the delay start time | ||
| OK |
|
If you do not want to begin a cycle immediately, you may choose the DELAY START option. This will delay the start of the wash cycle by up to 20 hours.
To set a delayed start:
1.Select the Delay Start option using the LCD control buttons. Use the buttons to adjust the delay time up or down.
2.Press START/PAUSE to set the delay. The delay countdown has started when the START/PAUSE light stops blinking.
IMPORTANT: If you are using the Delay Wash option, use of the dispenser cartridge is recommended, or powdered detergent may be used in the HE powdered detergent compartment.
Remote Start (model WFL98 only)
Remote Start |
Remote
Start
Remote Start allows you to start your washer remotely using the Smartappliances app. Make this selection last using the System Settings button and the LCD control button. Make sure that your washer remains closed and the cycle is not adjusted until you start the cycle.
1.Select the desired cycle and features.
2.Press the System Settings button.
3.Press the LCD control button for Remote Start.
4.Press the LCD control button for the desired setting.
5.Make sure the washer remains on. If the washer is turned off, the Remote Start feature will turn off.
11