CommonDishwashingProblems

Spotting and filming Hard water

Fill detergent dispensers to capacity. Use dishwasher detergent with highest available phosphorus content. May be necessary to install water softener.

To remove spots and film, try a vinegar rinse..

1.Wash and rinse load as usual. Use Air Dry Option.

2.Remove all metal Items.

3.Put 2 cups (500 mL) white vinegar In a container on the bottom rack.

4.Run dishwasher through a complete washing cycle.

Water is not hot enough

Water temperature should be at least 140°F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting and do not use Lo-Energy Option.

Not enough detergent, or improper detergent

Use more dishwasher detergent. Use detergent with highest available phosphorus con-

tent.. .especrally with hard water.

“Old” detergent

Use only fresh dlshwasher detergent. Store tightly closed container, in cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Improper loading

Make sure dishes and glassware are loaded so spray reaches all surfaces and items drain properly. Do not overload. Do not nest Items.

Make sure large Items do not block spray from reaching detergent dispensers.

No rinse agent

Does the rtnse agent.dispenser need filling? See instructions on page 13.

AIR DRY Setting used

Drying without heat may result in some spotting of glasses and silver.

Small particles deposited on items Spray arm not rotating freely

Check spray arms to make sure they turn freely after loading. Be sure a utensil has not prevented their turning

“Old” detergent

Use only fresh dishwasher detergent Store tightly closed contafner, in cool, dry place. Discard old detergent. Do not fill dfspensers until ready to start dishwasher

Not enough detergent, or improper detergent

Use more dishwasher detergent. Use detergent with highest available phosphorus content., especially with hard water.

Water is not hot enough

Water temperature should be at least 140°F (60°C). Set water healer thermostat to a higher setting. Run water at sink until hot before starting and do not use Lo-Energy Option.

Water pressure may be low, dishwasher is not filling properly

If water pressure is low, do not use water for other purposes while dishwasher is running (to assure correct fills).

Dishes not dry No rinse agent

Does the rinse agent dispenser need filling? See instructions on page 13.

Water is not hot enough

Water’temperature should be at least 140°F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting.

Improper loading

Make sure dishes and glassware are loaded so spray reaches all surfaces and items drain properly, Do not overload. Do not nest items.

AIR DRY Setting used

Allow more time when using Air Dry Option, or use Heat Dry Option. Plastic items may need towel drying.

Black marks on dishes

Aluminum utensils rubbing against items during washing

Use care In loading aluminum utensils,

especially any lightweight foil contafner. Place so they do not touch dishes. Remove black marks wfth plastic scourfng pad and a mild abrasive cleanser.

Chipping or breaking glassware Improper loading

DO not overload. Load glasses In the top rack only. Load between prongs, not over them. Glasses loaded over prongs will not be supported and may chip or break.

Page 18
Image 18
Whirlpool GDP8500XX manual CommonDishwashingProblems, Tent.. .especrally with hard water Old detergent, Improper loading

GDP8500XX specifications

The Whirlpool GDP8500XX is a sophisticated dishwasher designed to deliver efficient cleaning and user-friendly experience while blending seamlessly into modern kitchens. Known for its essential features and innovative technologies, this model caters to the needs of families and individuals who value performance and convenience.

One of the standout features of the GDP8500XX is its spacious interior. This dishwasher can accommodate up to 14 place settings, making it ideal for larger households or those who entertain frequently. The adjustable upper rack provides flexibility, allowing users to optimize space for larger pots and pans, while the lower rack is designed to hold larger items securely.

Equipped with Whirlpool’s renowned PowerClean technology, the GDP8500XX ensures remarkable cleaning performance. Its high-pressure cleaning jets target tough food residues in hard-to-reach areas, ensuring that every dish, pot, and utensil comes out sparkling clean without the need for pre-rinsing. This technology combines with a dedicated spray arm that flows water efficiently throughout the entire dishwasher for consistent results.

In terms of efficiency, the GDP8500XX boasts an impressive ENERGY STAR certification. This means it uses significantly less water and energy than standard models, translating into savings on utility bills as well as a reduced environmental impact. With a variety of wash cycles, including a quick rinse option and heavy-duty settings, users can choose the most suitable cycle depending on the load and soil level.

Another noteworthy characteristic of the Whirlpool GDP8500XX is its noise level, which operates at a quiet 50 dBA. This allows users to run the dishwasher late at night or during gatherings without disturbing conversations or activities.

The intuitive control panel enhances the user experience, featuring easy-to-read buttons and an LED display that clearly communicates cycle status. Additionally, the dishwasher includes a soil sensor that automatically adjusts the wash cycle duration based on the soil level detected, ensuring optimal cleaning while conserving energy.

Overall, the Whirlpool GDP8500XX combines elegant design with high-performance features, making it a dependable choice for those seeking efficiency, flexibility, and superior cleaning power in their kitchen. Its blend of technology and user-oriented details exemplifies Whirlpool's commitment to quality and innovation in home appliances.